Универсален USB програматор XGecu T76

Hardware Parameters:
- Controller:
    - 32-bit RISC-V MCU + FPGA (BGA256)
    - Type-C USB3.0 SS 5GHz compatible with USB2.0 480MHz
- IC chip socket:
    - 48-pin full drive I/O + ISP 28-pin dedicated I/O
    - A total of 76-pin external high-speed driver, ensuring high reliability
- Voltage specifications:
    - VCC: 1.2V-6.5V (64-level adjustable)
    - VPP: 6.5V-25V (64-level adjustable)
    - I/O signal: 1.2V-3.6V (64-level adjustable)
- Overcurrent protection:
    - VCC: 120mA-450mA adjustable
    - VPP: 150mA
- Power consumption:
    - 5V <1A. Static power consumption: 150mA
    - No external power supply needed for programming all chips
    - When connected up to 4 programmers simultaneously, it supports an external power supply of 5V-5.5V with a current of not less than n*1A
- External power supply protection: over-voltage, under-voltage,  over-current, reverse connection
- External dimensions: 12x7x2.8cm

T76 chip support:
- 26, 27, 28, 29, 37, 39, 49, 50 series Parallel ROM, EPROM, EEPRO
- 24, 25, 35, 45, 85, 93, 95 series Serial EEPROM
- P-NAND Flash (new model chips can be added with customized parameters)
- SPI NAND (SD NAND/SD Card)
- EMMC/EMCP
- Microcontroller series
- GAL/CPLD Programmable Logic Device Programming
- Supports VGA tool and VGA ISP programming
- SRAM chip test
- 54, 74, CMOS4000 series IC logic test
- Can test common logic ICs, test can be localized to the logic gate circuit
- Customisable logic vector table to increase chip support
- T76 will support all the chips that T48/T56 can support

Package Contents:
1 x Universal USB programmer XGecu T76
1 x USB 3.0 Type-C to Type-A cable (high quality)


Материали за изтегляне (Datasheets, софтуер и др.):

XGecu T76 - User Manual
XGecu T76 - Software
XGecu T76 - Device Support List